超高強度：IP65 防護等級，可防水濺。 IP68 (10m) 防護等級，可浸泡在 10 公尺深的淡水中。採用高強度不銹鋼經電火花線切割而成。最大允許過載值為額定容量的 4.8 至 19.9 倍。
高訊號雜訊比：矽應變片的訊號強度是傳統箔式應變片的 75 倍。此訊號經過放大，因此雜訊失真幾乎為零。
提供 IP60 版本：IP60 版本適用於多塵環境。
注意：IP68 感測器的 Fz 量程會隨著浸泡深度的增加而降低。有關詳細說明，請參閱“手冊”標籤下的“附錄”中的“IP68 F/T 感測器詳細資訊”，或聯絡您的客戶代表。
| Specification | Value |
|---|---|
| Measurement Range | 7200 N / 1400 Nm |
| Sensing Range | |
| X/Y Force Sensing Range | ±7200 N |
| X/Y Torque Sensing Range | ±1400 Nm |
| Z Force Sensing Range | ±18000 N |
| Z Torque Sensing Range | ±1400 Nm |
| Resolution | |
| X/Y Force Sensing Resolution | 1.5 N |
| X/Y Torque Sensing Resolution | 0.2 Nm |
| Z Force Sensing Resolution | 3 N |
| Z Torque Sensing Resolution | 0.14 Nm |
| Overload | |
| Force X/Y Single Axis Overload | ±36000 N |
| Force Z Single Axis Overload | ±110000 N |
| Torque X/Y Single Axis Overload | ±6800 Nm |
| Torque Z Single Axis Overload | ±6800 Nm |
| Stiffness | |
| Force X/Y Calculated Stiffness | 2.4×10^8 N/m |
| Torque X/Y Calculated Stiffness | 1.5×10^6 Nm/rad |
| Force Z Calculated Stiffness | 3.6×10^8 N/m |
| Torque Z Calculated Stiffness | 3.2×10^6 Nm/rad |
| Other | |
| Height | 74.8 mm |
| Weight | 13.2 kg |
| Diameter | 204 mm |
| Interface Plate Rating | IP65/IP68 |
| Communication Interface | Analog (+/-10V) EtherCAT & RS485 Ethernet & RS422 EtherNet/IP & CAN PROFINET |
| Accuracy (% Full Scale) | 0.75 – 1.25% |
| Latency | <1 ms |
| Sample Rate | 40 kHz |
| Connector | 20-pin Hirose |
Accuracy values vary depending on the axis of measurement. For detailed specifications and axis-specific accuracy data, please contact our sales team.
The effective sample rate is determined by the DAQ device in use. Specifically, the sensor sample rate equals the DAQ device’s total data rate divided by six (6) channels; one for each axis of force and torque. For additional assistance, please contact our sales or engineering team.
| Specification | Value |
|---|---|
| Measurement Range | 7200 N / 1400 Nm |
| Sensing Range | |
| X/Y Force Sensing Range | ±7200 N |
| X/Y Torque Sensing Range | ±1400 Nm |
| Z Force Sensing Range | ±18000 N |
| Z Torque Sensing Range | ±1400 Nm |
| Resolution | |
| X/Y Force Sensing Resolution | 1.5 N |
| X/Y Torque Sensing Resolution | 0.2 Nm |
| Z Force Sensing Resolution | 3 N |
| Z Torque Sensing Resolution | 0.14 Nm |
| Overload | |
| Force X/Y Single Axis Overload | ±36000 N |
| Force Z Single Axis Overload | ±110000 N |
| Torque X/Y Single Axis Overload | ±6800 Nm |
| Torque Z Single Axis Overload | ±6800 Nm |
| Stiffness | |
| Force X/Y Calculated Stiffness | 2.4×10^8 N/m |
| Torque X/Y Calculated Stiffness | 1.5×10^6 Nm/rad |
| Force Z Calculated Stiffness | 3.6×10^8 N/m |
| Torque Z Calculated Stiffness | 3.2×10^6 Nm/rad |
| Other | |
| Height | 74.8 mm |
| Weight | 13.2 kg |
| Diameter | 204 mm |
| Interface Plate Rating | IP65/IP68 |
| Communication Interface | Analog (+/-10V) EtherCAT & RS485 Ethernet & RS422 EtherNet/IP & CAN PROFINET |
| Accuracy (% Full Scale) | 0.75 – 1.25% |
| Latency | <1 ms |
| Sample Rate | 40 kHz |
| Connector | 20-pin Hirose |
Accuracy values vary depending on the axis of measurement. For detailed specifications and axis-specific accuracy data, please contact our sales team.
The effective sample rate is determined by the DAQ device in use. Specifically, the sensor sample rate equals the DAQ device’s total data rate divided by six (6) channels; one for each axis of force and torque. For additional assistance, please contact our sales or engineering team.
濕式應用
機械組裝
精密夾具中的零件放置與拆卸
材料去除、研磨和拋光
濕式應用
機械組裝
精密夾具中的零件放置與拆卸
材料去除、研磨和拋光