我們最小的六軸感測器現已推出鈦合金版本：Nano17 鈦合金版可輕鬆安裝在空間有限的研究應用中。
非鐵磁性材料：鈦合金結構。
超高解析度：可分辨低至 0.149 克力的力。
超高強度：採用 5 級鈦合金經電火花線切割而成。單軸最大允許過載值為額定容量的 4.9 至 19.6 倍。
高信噪比：矽應變片提供的訊號強度是傳統箔式應變片的 75 倍。此訊號經過放大，從而實現近乎零雜訊失真。
| Specification | Value |
|---|---|
| Measurement Range | 50 N / 0.5 Nm |
| Sensing Range | |
| X/Y Force Sensing Range | ±50 N |
| X/Y Torque Sensing Range | ±0.5 Nm |
| Z Force Sensing Range | ±70 N |
| Z Torque Sensing Range | ±0.5 Nm |
| Resolution | |
| X/Y Force Sensing Resolution | 0.0125 N |
| X/Y Torque Sensing Resolution | 0.06 Nm |
| Z Force Sensing Resolution | 0.0125 N |
| Z Torque Sensing Resolution | 0.0625 Nm |
| Overload | |
| Force X/Y Single Axis Overload | ±250 N |
| Force Z Single Axis Overload | ±480 N |
| Torque X/Y Single Axis Overload | ±1.6 Nm |
| Torque Z Single Axis Overload | ±1.8Nm |
| Stiffness | |
| Force X/Y Calculated Stiffness | 8.2×10^6 N/m |
| Torque X/Y Calculated Stiffness | 2.4×10^2 Nm/rad |
| Force Z Calculated Stiffness | 1.1×10^7 N/m |
| Torque Z Calculated Stiffness | 3.8×10^2 Nm/rad |
| Resonant Frequency | |
| Fx/Fy/Tz Resonant Frequency | 7200 Hz |
| Fz/Tx/Ty Resonant Frequency | 7200 Hz |
| Other | |
| Height | 14.5 mm |
| Weight | 0.00907 kg |
| Diameter | 17 mm |
| Interface Plate Rating | IP20 |
| Communication Interface | Analog (+/-10V) Analog (mV/V) EtherCAT & RS485 (Board) EtherCAT & RS485 (Box) Ethernet & RS422 (Board) Ethernet & RS422 (Box) EtherNet/IP & CAN PROFINET |
| Accuracy (% Full Scale) | 0.75 – 1.25% |
| Latency | <1 ms |
| Sample Rate | 40 kHz |
| Connector | 12-pin round Amphenol |
Accuracy values vary depending on the axis of measurement. For detailed specifications and axis-specific accuracy data, please contact our sales team.
The effective sample rate is determined by the DAQ device in use. Specifically, the sensor sample rate equals the DAQ device’s total data rate divided by six (6) channels; one for each axis of force and torque. For additional assistance, please contact our sales or engineering team.
| Specification | Value |
|---|---|
| Measurement Range | 50 N / 0.5 Nm |
| Sensing Range | |
| X/Y Force Sensing Range | ±50 N |
| X/Y Torque Sensing Range | ±0.5 Nm |
| Z Force Sensing Range | ±70 N |
| Z Torque Sensing Range | ±0.5 Nm |
| Resolution | |
| X/Y Force Sensing Resolution | 0.0125 N |
| X/Y Torque Sensing Resolution | 0.06 Nm |
| Z Force Sensing Resolution | 0.0125 N |
| Z Torque Sensing Resolution | 0.0625 Nm |
| Overload | |
| Force X/Y Single Axis Overload | ±250 N |
| Force Z Single Axis Overload | ±480 N |
| Torque X/Y Single Axis Overload | ±1.6 Nm |
| Torque Z Single Axis Overload | ±1.8Nm |
| Stiffness | |
| Force X/Y Calculated Stiffness | 8.2×10^6 N/m |
| Torque X/Y Calculated Stiffness | 2.4×10^2 Nm/rad |
| Force Z Calculated Stiffness | 1.1×10^7 N/m |
| Torque Z Calculated Stiffness | 3.8×10^2 Nm/rad |
| Resonant Frequency | |
| Fx/Fy/Tz Resonant Frequency | 7200 Hz |
| Fz/Tx/Ty Resonant Frequency | 7200 Hz |
| Other | |
| Height | 14.5 mm |
| Weight | 0.00907 kg |
| Diameter | 17 mm |
| Interface Plate Rating | IP20 |
| Communication Interface | Analog (+/-10V) Analog (mV/V) EtherCAT & RS485 (Board) EtherCAT & RS485 (Box) Ethernet & RS422 (Board) Ethernet & RS422 (Box) EtherNet/IP & CAN PROFINET |
| Accuracy (% Full Scale) | 0.75 – 1.25% |
| Latency | <1 ms |
| Sample Rate | 40 kHz |
| Connector | 12-pin round Amphenol |
Accuracy values vary depending on the axis of measurement. For detailed specifications and axis-specific accuracy data, please contact our sales team.
The effective sample rate is determined by the DAQ device in use. Specifically, the sensor sample rate equals the DAQ device’s total data rate divided by six (6) channels; one for each axis of force and torque. For additional assistance, please contact our sales or engineering team.
生物力學研究
強磁場環境下的測量
生物力學研究
強磁場環境下的測量