非鐵磁性材料：鈦合金結構。
超高解析度：可分辨低至 1.13 克力的力。
超高強度：採用 5 級鈦合金經電火花線切割而成。最大允許單軸過載值為額定容量的 7.4 至 15.0 倍。
高訊號雜訊比：矽應變片的訊號強度是傳統箔式應變片的 75 倍。此訊號經過放大，從而實現了近乎零雜訊失真。
| Specification | Value |
|---|---|
| Measurement Range | 80 N / 4 Nm |
| Sensing Range | |
| X/Y Force Sensing Range | ±80 N |
| X/Y Torque Sensing Range | ±4 Nm |
| Z Force Sensing Range | ±160 N |
| Z Torque Sensing Range | ±2 Nm |
| Resolution | |
| X/Y Force Sensing Resolution | 0.03 N |
| X/Y Torque Sensing Resolution | 0.0008 Nm |
| Z Force Sensing Resolution | 0.06 N |
| Z Torque Sensing Resolution | 0.0005 Nm |
| Overload | |
| Force X/Y Single Axis Overload | ±1500 N |
| Force Z Single Axis Overload | ±4600 N |
| Torque X/Y Single Axis Overload | ±30 Nm |
| Torque Z Single Axis Overload | ±40 Nm |
| Stiffness | |
| Force X/Y Calculated Stiffness | 3.1×10^7 N/m |
| Torque X/Y Calculated Stiffness | 4.5×10^3 Nm/rad |
| Force Z Calculated Stiffness | 6.4×10^7 N/m |
| Torque Z Calculated Stiffness | 6.5×10^3 Nm/rad |
| Resonant Frequency | |
| Fx/Fy/Tz Resonant Frequency | 4900 Hz |
| Fz/Tx/Ty Resonant Frequency | 5000 Hz |
| Other | |
| Height | 18.2 mm |
| Weight | 0.0334 kg |
| Diameter | 27 mm |
| Interface Plate Rating | IP20 |
| Communication Interface | Analog (+/-10V) Analog (mV/V) EtherCAT & RS485 (Board) EtherCAT & RS485 (Box) Ethernet & RS422 (Board) Ethernet & RS422 (Box) EtherNet/IP & CAN PROFINET |
| Accuracy (% Full Scale) | 0.75 – 1.25% |
| Latency | <1 ms |
| Sample Rate | 40 kHz |
| Connector | 12-pin round Amphenol |
Accuracy values vary depending on the axis of measurement. For detailed specifications and axis-specific accuracy data, please contact our sales team.
The effective sample rate is determined by the DAQ device in use. Specifically, the sensor sample rate equals the DAQ device’s total data rate divided by six (6) channels; one for each axis of force and torque. For additional assistance, please contact our sales or engineering team.
| Specification | Value |
|---|---|
| Measurement Range | 80 N / 4 Nm |
| Sensing Range | |
| X/Y Force Sensing Range | ±80 N |
| X/Y Torque Sensing Range | ±4 Nm |
| Z Force Sensing Range | ±160 N |
| Z Torque Sensing Range | ±2 Nm |
| Resolution | |
| X/Y Force Sensing Resolution | 0.03 N |
| X/Y Torque Sensing Resolution | 0.0008 Nm |
| Z Force Sensing Resolution | 0.06 N |
| Z Torque Sensing Resolution | 0.0005 Nm |
| Overload | |
| Force X/Y Single Axis Overload | ±1500 N |
| Force Z Single Axis Overload | ±4600 N |
| Torque X/Y Single Axis Overload | ±30 Nm |
| Torque Z Single Axis Overload | ±40 Nm |
| Stiffness | |
| Force X/Y Calculated Stiffness | 3.1×10^7 N/m |
| Torque X/Y Calculated Stiffness | 4.5×10^3 Nm/rad |
| Force Z Calculated Stiffness | 6.4×10^7 N/m |
| Torque Z Calculated Stiffness | 6.5×10^3 Nm/rad |
| Resonant Frequency | |
| Fx/Fy/Tz Resonant Frequency | 4900 Hz |
| Fz/Tx/Ty Resonant Frequency | 5000 Hz |
| Other | |
| Height | 18.2 mm |
| Weight | 0.0334 kg |
| Diameter | 27 mm |
| Interface Plate Rating | IP20 |
| Communication Interface | Analog (+/-10V) Analog (mV/V) EtherCAT & RS485 (Board) EtherCAT & RS485 (Box) Ethernet & RS422 (Board) Ethernet & RS422 (Box) EtherNet/IP & CAN PROFINET |
| Accuracy (% Full Scale) | 0.75 – 1.25% |
| Latency | <1 ms |
| Sample Rate | 40 kHz |
| Connector | 12-pin round Amphenol |
Accuracy values vary depending on the axis of measurement. For detailed specifications and axis-specific accuracy data, please contact our sales team.
The effective sample rate is determined by the DAQ device in use. Specifically, the sensor sample rate equals the DAQ device’s total data rate divided by six (6) channels; one for each axis of force and torque. For additional assistance, please contact our sales or engineering team.
生物力學研究
強磁場環境下的測量
醫學應用
生物力學研究
強磁場環境下的測量
醫學應用